NOTICE TO CUSTOMERS:
Equipment may be purchased for local pickup only, USPS or other mail carriers no longer handle these items.
If we are required to cancel all or part of your order, we will be contacted and credited accordingly.
CLEARANCE PRICING! As low as 65¢ each!
Replacement Head for the CE4+ Version 2 sold on this website.
IMPORTANT: We will not be restocking the CE4+ V2 Clearomizer these coils are used with due to manufacturer's increased order minimums (production runs are now limited to retailer's specific orders).
IMPORTANT! Design can vary between manufacturers, and this may not fit all CE4+ V2s. Guaranteed compatible with the CE4+ V2 sold here (formerly "Type B")
*Clearomizer coils are considered disposable items, so we can not accept returns other than DOA (dead on arrival).
|
|
Color: Stainless Steel
Coil Rating: 2.0 ohm (+/- .02)
Total Length: 2.1 cm
*Wicks lengths may vary slightly. |
Some users report that trimming just a small amount off the bottom of silicone cap covering the CE4+ coil provides a significant performance boost and/or resolves occasional wicking issues.
NOTE: Low resistance devices rate at approximately.8-2.0 ohms and work extremely well at simulating high voltage vaping. Any low resistance device should NOT be used on batteries rating less than 450mAh. Likewise, they should should NOT be used with high voltage mods (5v or higher), as you will quickly burn up your coil and/or your battery may shut off.
Lower resistance means they draw more current. This makes them hotter and results in more vapor (15-25% more) faster and a stronger throat hit. The higher performance, however, gives them a reduced life span, and the higher current draw will drain your batteries faster (roughly 20% - mileage varies greatly).